1. Wide range of improvement. This type of hoist has less requirements on the type, characteristics and lumpiness of the material. It can not only improve powdery, granular and block materials, but also improve abrasive materials. Material temperature≤250℃.
2. Large conveying capacity. This series of hoists have various specifications of NE15-NE800. The lifting range is 15-800m³/h.
3. Small driving power. This type of elevator adopts inflow feeding, gravity-induced discharge, and uses densely arranged large-capacity hoppers for conveying, with low chain speed and large lifting capacity. When the material is hoisted, there is almost no material return phenomenon, so the driving power is small. The theoretical calculation shaft power is 25%-45% of the chain hoist.
4. Long service life. The feeding of the elevator adopts the inflow type, and there is little squeezing and collision between the materials. The design of this machine ensures that the materials will not be scattered during the feeding, lifting and unloading, which prevents the particles from wearing out and the conveyor chain The use of plate chain type high-strength wear-resistant chain extends the service life of the chain and hopper. According to the long-term practice of similar foreign products in the production, the service life of the conveyor chain exceeds 5 years.
5. High lifting height. This series of hoists have low chain speed, stable operation, and adopts a plate chain type high-strength wear-resistant chain. Therefore, a higher lifting height (up to 40m or more) can be achieved.
6. Good sealing and less environmental pollution.
7. Good operational reliability. The advanced design principle ensures the reliability of the whole machine operation, and the trouble-free time exceeds 30,000 hours.
8. Convenient operation and maintenance, with few wearing parts.
9. Small mechanical size. Compared with various other hoists with the same lifting capacity, this hoist has a smaller mechanical size.
10. High structural accuracy. The casing is folded and welded, with good rigidity and beautiful appearance.
11. The use cost is low.